EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
630 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] ip netstream export version 9
Step 3 Set the source address, destination port number, and destination address for exporting packets.
# Set the destination address and destination port number for exporting packets.
[SwitchB] ip netstream export host 10.2.1.2 6000
# Configure the source address for exporting packets.
[SwitchB] ip netstream export source 10.2.1.1
Step 4 Configure the Flexible NetStream feature on Switch B.
# Create a record named test and enter the test view.
[SwitchB] ip netstream record test
[SwitchB-record-test]
# Configure the aggregation key words of the test record.
[SwitchB-record-test] match ip destination-address
[SwitchB-record-test] match ip destination-port
# Configure Switch B to send the inbound and outbound interface indexes in the test record to
the NSC.
[SwitchB-record-test] collect interface input
[SwitchB-record-test] collect interface output
# Send the number of packets and bytes of the inbound and outbound traffic to the NSC.
[SwitchB-record-test] collect counter bytes
[SwitchB-record-test] collect counter packets
[SwitchB-record-test] quit
Step 5 Configure the Flexible NetStream feature on GE 1/0/0.
# Enable the NetStream function for the inbound and outbound traffic on GE 1/0/0.
[SwitchB] interface gigabitethernet 1/0/0
[SwitchB-GigabitEthernet1/0/0] ip netstream inbound
[SwitchB-GigabitEthernet1/0/0] ip netstream outbound
# Set the fixed-packets sampling ratio for the inbound and outbound traffic on GE 1/0/0 to 100.
[SwitchB-GigabitEthernet1/0/0] ip netstream sampler fix-packets 100 inbound
[SwitchB-GigabitEthernet1/0/0] ip netstream sampler fix-packets 100 outbound
# Apply the record test to GE 1/0/0.
[SwitchB-GigabitEthernet1/0/0] port ip netstream record test
[SwitchB-GigabitEthernet1/0/0] quit
Step 6 Verify the configuration.
# After successful configurations, run the display netstream all command in the user view of
Switch B to check the configurations.
<SwitchB> display netstream all
system
ip netstream export version 9
ip netstream export source 10.2.1.1
ip netstream export host 10.2.1.2 6000
slot 0
GigabitEthernet1/0/0
port ip netstream record test
ip netstream inbound
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 7 NetStream Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7-31

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals