Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join : disabled
Handshake timer:10 sec
Handshake hold-time:60 sec
IP pool:10.0.0.1/8
Logging host:4.0.0.1
SNMP host:3.0.0.1
FTP server:2.0.0.1
SFTP server:2.0.0.2
cluster-member ftp-timeout: 300 sec(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : disabled
There are 4 member(s) in the cluster, and 0 of them are down.
Step 10 Distribute configuration files in batches.
# Run the batch distribution command on the administrator switch. Member switches download
configuration files from the FTP server (2.0.0.1) in NAT mode and automatically set them as
the default configuration files for the next startup.
[HUAWEI_0.Administrator-1] cluster
[HUAWEI_0.Administrator-1-cluster] cluster-plug-play ip 2.0.0.1 username user1
password 123
[HUAWEI_0.Administrator-1-cluster] cluster-member group-by member-number 2 to 3
get configuration-file vrpcfg-hgmp.zip
Step 11 Verify the configuration.
# Run the display member-getfile-stat command on the administrator switch to check whether
member switches successfully obtain the configuration files, system software, and patch files,
and you can view that success is displayed.
[HUAWEI_0.Administrator-1] display member-getfile-stat
The status of member switchs getting file:
------------------------------------------------------------------------
SN Device MacAddress IPAddress Result
------------------------------------------------------------------------
2 S9300 0003-0003-0003 10.0.0.3 success
3 S9300 0004-0004-0004 10.0.0.4 success
# Run the dir command on member switches and you can find that member switches successfully
download the specified configuration files. Take Member-2 as an example.
<HUAWEi_2.Member-2> dir *.zip
Directory of cfcard:/
Idx Attr Size(Byte) Date Time FileName
0 -rw- 1,491 Sep 03 2008 17:43:52 vrpcfg.zip
1 -rw- 752 Aug 05 2008 15:04:36 vrpcfg-hgmp.zip
506,880 KB total (35,920 KB free)
<HUAWEi_2.Member-2> cd slave#cfcard:
<HUAWEi_2.Member-2> dir *.zip
Directory of slave#cfcard:/
Idx Attr Size(Byte) Date Time FileName
0 -rw- 1,491 Sep 03 2008 17:43:54 vrpcfg.zip
1 -rw- 752 Aug 05 2008 15:07:50 vrpcfg-hgmp.zip
503,544 KB total (34,776 KB free)
# Run the display startup command on member switches and you can find that names of the
configuration files for the next startup of the member switch is changed. Take Member-2 as an
example.
<HUAWEi_2.Member-2> display startup
MainBoard:
Configured startup system software: cfcard:/S9300.cc
Startup system software: cfcard:/S9300.cc
Next startup system software: cfcard:/S9300.cc
Startup saved-configuration file: cfcard:/vrpcfg.zip
Next startup saved-configuration file: cfcard:/vrpcfg-hgmp.zip
8 HGMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8-92 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
To Next Page
Loading...
