990400 Rev C 2010 May 1
Reconstruction of Anatomy
8-17
To switch off the hu cursor:
1. Right click the image. A popup window appears.
2. Click HU Statistics on the popup menu. The menu closes and
the cursor reverts to the default cursor.
Measurements can be selectively removed from a view as
desired. All measurements can also be deactivated/reactivated
for a view.
To remove a specific measurement:
1. Right-click the measurement that is to be removed.
2. Select Remove Measurement from the popup menu.
Remove All Measurements - removes all measurements from
selected view.
Inactivate All Measurements - grays out all measurement
indicators and removes the measurements from the selected
view. When this is done, the Reactivate All Measurements
becomes available.
Reactivate All Measurements - restores all of the inactivated
measurements to the selected view.
To Next Page
Loading...