iZ Technology RADAR - Page 106

iZ Technology Corporation
RADAR 3.50
OPERATIONS
99
When finished selecting the file(s) and/or folder(s) to move, press the key to complete the
selection process. This will transfer the items to a clipboard at which point the display will show
the number of files and size along with the prompt BROWSE TO PASTE before returning to the
browse display.
Use the keyboard and numeric keys, the and keys, Jog/Shuttle Wheel as well as the ,
and keys to navigate to the drive/directory to move to and then press the key.
A confirmation prompt will show the number of files/folders and the total size. Use the arrow keys
to select YES and then press the key to proceed. For example:
Press =
This process removes the file(s) and/or folder(s) from their original location.
After you have finished using a USB drive, make sure you unmount it before unplugging it
from RADAR. You can access the MOUNT/UNMOUNT dialog via the DISK MENU or by
pressing + UNMNT on the Session Controller.
To delete files and/or folders:
Hold the key and press the letter or use the , the and keys and the
key to go to the MAIN MENU / FILE MENU / FILE MANAGEMENT selection and press
the key.
Use the and keys to select the drive that contains the file(s) and/or folder(s) to delete and
press the key.
MOVE COMPLETE
PRESS ANY BUTTON
MOVE FILES: D
-
> D
+ WORKING +
MOVE FILES: D
-
> D
+ 1 OF 1 +
25 FLS/6.6MB
PROCEED? NO YES