www.izcorp.com • 1.800.776.1356
Switch the clock mode to 24-HR or 12-HR (AM/PM) or
switch the clock OFF.
The clock cannot be displayed in 800 X
600 resolution.
When this preference is enabled, audio will not be
monitored (even on input-readied tracks) when the
transport is stopped.
The and keys can be used to locate to the MARK
IN and MARK OUT points respectively. This option
allows them to be used to locate the previous and next
points in the locate list (not including the MARK IN and
MARK OUT points).
Up to three foot switches can be plugged in to the back of
the Session Controller. Their default functions are
PLAY/STOP, LAST LOC, and PUNCH IN/OUT. Using
this option assigns any of the macros (recorded using the
MACRO keys on the Session Controller) to any of the
foot switches.
This option controls how RADAR
will respond to locate
commands received via MIDI Machine Control.
These record preferences define several recording
options to help customize RADAR operation for specific
situations.
With this feature disabled, hold and then press
(Play) on the Session Controller or the KC-24 in order
to begin recording. If this feature is enabled, pressing
only will start recording.
The track arming keys on the Session Controller or the
KC-24 can engage either record READY or instant
RECORD status per track. Instant RECORD allows tracks
to be dropped in and out of RECORD by pressing the
Track Arm keys during playback.
MAIN/PREFS MENU:
CLOCK MODE
MAIN/PREFS MENU:
ASSIGN MMC LOC
MAIN/PREFS MENU:
ASSIGN FT-SWITCH
MAIN/PREFS MENU:
ARROW KEY GOTO
MAIN/PREFS MENU:
MUTE I/O ON STOP
RECORD PREFS:
TRACK ARM ACTION
RECORD PREFS:
1-BUTTON RECORD
MAIN/PREFS MENU:
RECORD PREFS
To Next Page
Loading...
