iZ Technology Corporation
This preference is used to enable or disable the
automatic mapping of record in and out times as MARK
IN and MARK OUT points.
This preference allows a low-disk space alarm to be set
that will alert the user when the available recording time
gets below the specified amount. The default setting for
this level is 5 minutes. Values for the warning threshold
range between 0 and 99 minutes. To disable the low disk
space warning set the value to 0 minutes.
This preference determines whether or not RADAR will
operate in a RECORD VERIFY mode when recording to
the audio disk. This data verification option will slow
down functionality.
When Record is pressed while the chase light is blinking,
RADAR will automatically go into record when chase is
established and exit record when chase lock is lost.
When RADAR is set to CONTINUOUS in the RECORD
ON CHASE setting it will go back into record whenever
chase is reestablished.
When PROJECT PER TAKE is enabled, RADAR will
automatically create a new project whenever it is
punched out of record. This allows subsequent takes to
be recorded in new projects.
This preference enables record recovery mode for live
recording. This feature is disabled by default. For more
information refer to APPLICATIONS: LIVE RECORDING:
RECORD RECOVERY MODE.
These dialogues are for creating preferences for certain
file related functions. The EXPORT FORMAT and FILL
SILENCE preferences are also used when using the
shortcut key.
When set to MB or TIME, a XXXMB PROCEED? or
XXXMIN PROCEED? dialogue will be added during the
backup and export procedures.
FILE PREFS:
SHOW SIZE
MAIN/PREFS MENU:
FILE PREFS
RECORD PREFS:
RECORD RECOVERY
RECORD PREFS:
PROJECT PER TAKE
RECORD PREFS:
RECORD ON CHASE
RECORD PREFS:
RECORD VERIFY
RECORD PREFS:
LOW DISK WARNING
RECORD PREFS:
RECORD MK IN/OUT
To Next Page
Loading...
