iZ Technology Corporation
If the BUFFER UNDERRUN error is being displayed
frequently when attempting to burn a DVD-R, the mode
can be changed to lower these error instances.
Setting the DVD BURN MODE to SAFE will set the DVD
multi-drive to use the PROGRAMMED I/O MODE which
is more reliable for burning. After changing the setting,
reboot RADAR for SAFE mode to take effect.
This dialogue sets the speed for burning DVD-R disks.
Choose speeds from 1X through 8X, or select MAX to let
the DVD drive burn at its maximum possible speed. If the
DVD drive or DVD-R disk is not capable of burning at the
speed selected, it will automatically use the closest
available speed.
These project preferences define the parameters that will
be used every time a new project is created.
This preference has the following options:
TEMPLATE will use the settings of a selected template.
ASK will prompt the user to choose a template each time
a new project is created.
This feature controls how new projects are to be
numbered. If FROM 1 is selected, RADAR will assign the
lowest available project number whenever a new project
is created. If FROM CUR is selected, then RADAR will
use the next available number starting at the current
project number.
Sets the sample rate for newly created projects. Valid
values range from 32kHz to 192 kHz, depending on the
I/O cards installed.
This preference determines the default bit-depth or bit
resolution for newly created projects.
This preference determines the default TC format,
SMPTE or MTC for newly created projects.
PROJECT PREFS:
DEF TC FORMAT
PROJECT PREFS:
DEF BIT RES
PROJECT PREFS:
DEF SAMPLE RATE
PROJECT PREFS:
NEW PROJ NUMBER
PROJ PREFS:
NEW PROJ SETTNGS
MAIN/PREFS MENU:
PROJECT PREFS
FILE PREFS:
DVD BURN SPEED
FILE PREFS:
DVD BURN MODE
To Next Page
Loading...
