Table 4-19: Control Door Screen, 1 Page Only
Field Type Description
Terminal Number User Def. Enter the reader terminal to manipulate.
Ac
tion Type To g g le Choices are: Unlock
Lock
Timed
Note: Unlock
will unlock the door for a period of
time equal to the Access Time defined in the
terminal parameters screen for the selected
terminal.
Timed Duration User Def. Values range from 0 to 1440 minutes. When you
set th
e Action
Type as Timed, this value provides
the duration. For example, if a door is set timed for
10 minutes, it would remain unlocked for 10
minutes.
CK721-A User Interface CK721-A Installation and Operation
4-64 24-10349-8 Rev. B
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
Panel Soft Alarm
The term “soft alarm” refers to an alarm condition triggered through a system
transaction, rather than a hard-wired alarm input point.
NOTE
Soft Alarm points are pre-programmed in the system. Although you do
have access to these points from this screen, they should not be changed.
Reporting problems will occur.