CK721-A Installation and Operation CK721-A User Interface
24-10349-8 Rev. B 4-69
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
Table 4-22: Badge Screen, Page 1
Field Type Description
Executive Privilege Toggl e If enabled (Y), th
e cardholder has unlimited
access to all controlled doors.
Badge Type To g gle Choices are Standard and Override. Override
allo
ws the cardholder to bypass normal access
through keypad override.
Event Privilege
Level
User Def. Values range from 0 to 7, with 7 as the highest
eve
nt privilege. When events are created, they
are assigned a privilege level. A cardholder
may execute an event that is equal to or less
than their privilege level.
Issue Level User Def. Values range from 0 to 255. An initial issue is 0.
Issu
e levels can be increased for lost or stolen
badges when you want to retain the same
badge number.
Badge Status Toggle A badge can either be A(ctive) or I(nactive).
Expiration User Def. The date/time the badge expires. If configured
to 0, th
e badge never expires.
The controller badge expiration comparisons
ar
e based on the P2000 server’s “local time”
clock value (not the control's “local time” clock
value).
Note: Th
e controller’s “local time” value may
be the same as the P2000 server’s “local time”
value, or may have been offset by the value of
the panel’s database record parameter Time
Offset.
Custom PIN User Def. If using custom, rather than algorithmic PINs,
e
nter the code for the badge (4 to 9 digits).
Do not assign a 9 as a digit in the PIN#.
Special Access
(A, B, C)
User Def. The Special Access flag can be set to (A),
(B)
or (C). See “Assisted Access” on page 4-38 for
details.
This feature requires the Assisted Access
feat
ure to be set to (F) at the terminal screen.
To Next Page
Loading...
Need help?
General
