Johnson Controls CK721-A User Manual

CK721-A User Interface CK721-A Installation and Operation
4-4 24-10349-8 Rev. B
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
2. Start your terminal emulator software.
3. Configure the communications parameters within your VT100 terminal
emulation software to match the fo
llowing:
Port COMn
Baud Rate 115K
Data 8 bit
Parity none
Stop 1 bit
Flow Control none
4. At the login prompt, type CK720 and press <Enter>.
5. Type your password when prompted. (The default password is maste
r.)
6. Press <Enter>.
NOTE
You have three chances to login to the CK721-A panel. After three
attempts, the CK721-A disables login for about five minutes, after which
time you may try again. (Both login and password are case-sensitive.)
7. The CK721-A panel Main menu appears as shown.
Navigating Through the User Interface
Use the following keys to navigate throughout the user interface.
Arrow Keys Use the arrow keys to select a menu or option, or select a
parameter you wish to edit.
<Enter> Press <Enter> to
view a selected menu or execute an option,
like <Save> or <Next Record>.
<Space Bar> Some fields contain two or more pre-set options. Pressing
<Space Bar> toggles between availabl
e options.

Johnson Controls CK721-A Specifications

General

Brand	Johnson Controls
Model	CK721-A
Category	Controller
Language	English