Johnson Controls CK721-A User Manual

CK721-A Installation and Operation CK721-A User Interface
24-10349-8 Rev. B 4-73
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
Table 4-25: Input Screen, 1 Page Only
Field Type Description
Input Point
Na
me
User Def. Type in a descriptive name, up to 25
alphanumeric characters long.
4 State Togg l e If Y, the inp
ut is 4-state. N indicates the input is
2-state.
Input Point
En
abled
Toggle The input can be activated, meaning: able to
report an alarm condition.
Input Point Delay
En
abled
Toggle If enabled (Y), alarm reporting is delayed for the
number of seconds specified.
Entry/Exit Delay
(0-
600)
User Def. Enter a time in seconds that an alarm report to
the server will be delayed after a door is opened.
This represents the time you allow a cardholder to
enter the door and type a suppression event code
into a keypad. If they do not key in the code within
the set Entry/Exit Delay time, an alarm report will
go to the server, even if the door is closed.
Suppression
Ti
mezone
User Def. Values range between 0 and 64 time zones.
When the selected time zone is active, the input
point is suppressed (will not report an alarm
condition).
Activate Relay
Wh
en Set
Toggle When an input point goes into alarm, it can trigger
the CK721-A panel output relay. Enable this
option by selecting (Y).
Note: Cha
nges to the Panel Output Relay setup
(includes Output Latching and Alarm Relay
Linking settings) require a write of the database to
flash before the updated Panel Output Relay
settings take effect.

Johnson Controls CK721-A Specifications

General

Brand	Johnson Controls
Model	CK721-A
Category	Controller
Language	English