Johnson Controls CK721-A User Manual

CK721-A User Interface CK721-A Installation and Operation
4-84 24-10349-8 Rev. B
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
Control Output
This option allows you to manually control an output. Select Control Output from
the CK721-A Main menu to access Control Output options.
Table 4-33: Control Output Screen, 1 Page Only
Field Type Description
Terminal Number User Def. Enter the number of the terminal containing the
outp
ut you wish to control.
Output Point
Numbe
r
User Def. Type in a specific output point number.
Active State Toggle Select Set, Reset, Quick Flas
h, Slow Flash,
or Timed.
Duration User Def. Choose a value between 0 and 255 seconds if
you se
lected Timed as the active state.
Every output point, no matter which option was selected for it, can be commanded
with 5 different active states. See Table 4-34 to determine the effect of the
commands on each selected state.

Johnson Controls CK721-A Specifications

General

Brand	Johnson Controls
Model	CK721-A
Category	Controller
Language	English