Johnson Controls CK721-A User Manual

24-10349-8 Rev. B G-1
Appendix
G
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
CONFIGURING SSH AND SFTP CLIENTS A
On the CK721-A controller, the FTP and Telnet services are disabled when encryption is
turned on. You can use the PuTTY or WinSCP client software to log into the CK721-A
controller.
NOTE
This appendix provides information about third-party client software
installation and configuration, as available at the time of publication. For
the latest and most accurate information refer to online sources. Some
screens and selections described in this appendix may differ; however, the
general guidelines can still be follow.
PUTTY CLIENT
PuTTY is an SSH and Telnet client for the Windows platform. PuTTY is an open source
software that is available with source code and is developed and supported by a group of
volunteers. It can be downloaded from www.putty.org.
 To use PuT
TY to initiate secure remote connection:
1. Install PuTTY application from one of the free
download sources on the web.
2. Run the application:
3. The PuTTY Session configuration window opens up.

Johnson Controls CK721-A Specifications

General

Brand	Johnson Controls
Model	CK721-A
Category	Controller
Language	English