Johnson Controls CK721-A User Manual

CK721-A Installation and Operation CK721-A User Interface
24-10349-8 Rev. B 4-67
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
Type the system password and press <Enter>; the CK721-A will reboot.
NOTE
If you are connected to the CK721-A panel via the serial port, the boot up
messages will be displayed. The reboot process is complete when the
Login prompt appears. If you are connected to the CK721-A panel via
telnet, the connection will be lost. You must wait until the reboot process is
complete before a new telnet connection can be established.
Badge
Cardholder badge records may be entered into the system either individually or in
batches. To access an individual badge that is residing in the database, enter its
number value in the Start Badge field. An individual badge may also be created by
entering a badge number value in the first submenu, and then by saving its data in
the second submenu. The following screen shots depict the creation of badge
number 2 with executive privilege:
Badge Parameters Screen - Page 1

Johnson Controls CK721-A Specifications

General

Brand	Johnson Controls
Model	CK721-A
Category	Controller
Language	English