Configuring SSH and SFTP Clients CK721-A Installation and Operation
G-4 24-10349-8 Rev. B
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
To log in to PuTTY:
1. Launch the PuTTY application.
2. Select the saved session configuration (in
this example, “CK721-A”) and
click Load.
3. To open communication to the panel, click Open.
4. The login screen appears.
5. Proceed with login as you would using the TeraTerm.
To Next Page
Loading...
