CK721-A Installation and Operation Configuring SSH and SFTP Clients
24-10349-8 Rev. B G-7
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
To configure WinSCP session before loading it for the first use:
1. Launch the WinSCP application.
2. In the WinSCP Login screen appears.
3. With Session selected in the left window pane, configure the following in the
right window pane:
Host name - the IP address of the controller panel
Port number - port number 22 (default value) is required for secure
SFTP connection
User name - the name with which to login to the controller
Password - the password with which to login to the controller (In the
example below, diag user name and master password are used)
File Protocol - select SFTP
Do not close the window yet.
To Next Page
Loading...
