CK721-A Installation and Operation Configuring SSH and SFTP Clients
24-10349-8 Rev. B G-9
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
7. Specify a name and click Save to save the session.
8. Close the window.
After the session configuration has been saved, when
you re-open WinSCP you can
simply select it from the list and click Login button.
NOTE
Note that the directories, specifically the Local directory, may need
modification to point to the correct path for the source files.
To log in to WinSCP:
1. Launch the WinSCP application.
2. Select the saved session config
uration (in this example,
“diag@159.222.109.253”) and click Login.
3. Specify Password and click OK.
To Next Page
Loading...
