JUMO DICON touch - 1 Control Signals

12 Configuration
126
12.12.1 Control signals
Setup dialog box
Parameters
Parameter Selection/settings Description
Signal Program Start Digital selector This signal starts a program.
No selection
Signal Program Abort Digital selector This signal aborts a program.
No selection
Signal Program Pause Digital selector This signal stops a program.
No selection
Signal Next Section Digital selector This signal switches to the next pro-
gram section.
No selection
Signal Fast Forward Digital selector This signal fast forwards through the
programs. The longer the signal
appears for, the faster the process.
No selection
Signal Section Start Digital selector Switches back to section start.
No selection
Signal Next Program Digital selector Start next program
No selection
Signal Last Program Digital selector Start last program
No selection
Signal operation mode Manual Digital selector Start manual mode
No selection
Signal BCD Program selection Inactive Program selection using digital con-
trol signals