JUMO DICON touch - Identifying the Device Version; Order Details and Scope of Delivery

13
2 Identifying the device version
2.1 Order details
(1) Basic type
703571 JUMO DICON touch - two-channel process and program controller with RS485 interface
(2) Version
8 Standard with default settings
9 Customer-specific configuration (specifications in plain text)
(3) National language of display texts
01 German
02 English
03 French
(4) Input IN10
00 Not used
10 Analog input (universal)
(5) Input IN11
00 Not used
10 Analog input (universal)
(6) Outputs OUT3/4
00 None
11 1 relay (changeover contact)
12 2 relays (normally open)
13 1 solid state relay 230 V, 1 A
14 1 logic output 0/22 V, max. 30 mA
15 2 logic outputs 0/12 V, 20 mA
16 1 analog output
17 2 PhotoMOS® relays
1
20 2 solid state relays 230 V, 1 A for motor actuator drives (double slot: OUT3/4 and OUT7/8)
(7) Outputs OUT5/6
00 None
11 1 relay (changeover contact)
12 2 relays (normally open)
13 1 solid state relay 230 V, 1 A
14 1 logic output 0/22 V, max. 30 mA
15 2 logic outputs 0/12 V, 20 mA
16 1 analog output
17 2 PhotoMOS® relays
1
20 2 solid state relays 230 V, 1 A for motor actuator drives (double slot: OUT5/6 and OUT9/10)
(8) Outputs OUT7/8 (not available for assignment with module 20 on OUT3/4)
00 None