Keysight Technologies InfiniiVision DSOX1204A User Manual

What's New 1
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 29
Changed
Commands
:SYSTem:USB:EJECt (see
page 570)
Ejects connected USB storage devices.
:SYSTem:USB:PLISt? (see
page 571)
Returns the root path for all connected USB storage devices,
delimited by a newline character ("\n").
Command Description
Command Differences From InfiniiVision 1000 X-Series Oscilloscopes
:ABUS:BIT<m> (see page 169) Analog channel buses have bits for channels 3 and 4 but not for
the Ext Trig input.
:ABUS:BITS (see page 170) Analog channel buses have bits for channels 3 and 4 but not for
the Ext Trig input.
:BLANk (see page 142) EXT source is not available.
:DIGitize (see page 143) EXT source is not available.
:EXTernal:DISPlay (see
page 252)
OFF (or 0) is the only valid setting.
:MARKer:X1Y1source (see
page 330)
EXTernal source is not available.
:MEASure:DUTYcycle (see
page 361)
EXTernal source is not available.
:MEASure:FREQuency (see
page 363)
EXTernal source is not available.
:MEASure:NDUTy (see
page 364)
EXTernal source is not available.
:MEASure:NWIDth (see
page 367)
EXTernal source is not available.
:MEASure:PERiod (see
page 371)
EXTernal source is not available.
:MEASure:PWIDth (see
page 375)
EXTernal source is not available.
:MEASure:TEDGe (see
page 382)
EXTernal source is not available.
:MEASure:VTIMe (see
page 393)
EXTernal source is not available.
:SBUS<n>:CAN:SOURce (see
page 476)
EXTernal cannot be specified as the source.
:SBUS<n>:IIC[:SOURce]:CLOCk
(see page 485)
EXTernal cannot be specified as the source.

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English