Keysight Technologies InfiniiVision DSOX1204A User Manual

30 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
1 What's New
Discontinued
Commands
:SBUS<n>:IIC[:SOURce]:DATA
(see page 486)
EXTernal cannot be specified as the source.
:SBUS<n>:LIN:SOURce (see
page 498)
EXTernal cannot be specified as the source.
:SBUS<n>:SPI:SOURce:CLOCk
(see page 513)
EXTernal cannot be specified as the source.
:SBUS<n>:SPI:SOURce:FRAMe
(see page 514)
EXTernal cannot be specified as the source.
:SBUS<n>:SPI:SOURce:MISO
(see page 515)
EXTernal cannot be specified as the source.
:SBUS<n>:SPI:SOURce:MOSI
(see page 516)
EXTernal cannot be specified as the source.
:SBUS<n>:UART:SOURce:RX
(see page 535)
EXTernal cannot be specified as the source.
:SBUS<n>:UART:SOURce:TX
(see page 536)
EXTernal cannot be specified as the source.
:STATus (see page 162) EXT source is not available.
:TRIGger:PATTern (see
page 612)
Pattern triggers have bits for channels 3 and 4 but not for the Ext
Trig input, EXTernal cannot be used as an edge source.
:VIEW (see page 165) EXT source is not available.
:WAVeform:SOURce (see
page 654)
EXT source is not available.
Command Differences From InfiniiVision 1000 X-Series Oscilloscopes
Command Description
:EXTernal:DISPlay (see
page 252)
The Ext Trig input cannot be displayed as a digital waveform.
:EXTernal:LABel (see
page 253)
:EXTernal:POSition (see
page 255)

Keysight Technologies InfiniiVision DSOX1204A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204A
Category	Test Equipment
Language	English