Keysight 53230A - Page 11

The Keysight 53220A/230A provides a Web Interface that is built into the instrument. You can use this
interface over LAN for remote access and control of the instrument via a Java™-enabled Web browser,
such as Microsoft® Internet Explorer.
To access and use the 53220A/230A Web Interface:
1.
Establish a LAN interface connection from your PC to the instrument (e.g. 53220A/230A).
2.
Open your PC's Web browser.
3.
Launch the instrument's Web Interface by entering the IP address of the instrument, or its fully-qual-
ified host name, in the browser address field.
4.
Follow the instructions in the Web Interface's on-line help.
Example Programs
We have included several example programs on the Keysight 53210A/53220A/53230A Product Refer-
ence CD-ROM shipped with your instrument. The examples support the following language environments.
l Microsoft® Visual Basic®
l Microsoft® C++
l Keysight VEE
l National Instruments LabVIEW
To install the programming examples, see the Product Reference CD-ROM. Or, you can download the
examples from the Web at www.keysight.com.
Contact Keysight Technologies
You can contact Keysight Technologies at one of the following telephone numbers for warranty, service,
or technical support information.
In the United States: (800) 829-4444
In Europe: 31 20 547 2111
In Japan: 0120-421-345
Or use our Web link for information on contacting Keysight worldwide.
www.keysight.com/find/assist
Or contact your Keysight Technologies Representative.
Trademarks
Microsoft®, Visual Basic®, and Windows® are U.S. registered trademarks of Microsoft Corporation.
Adobe® and Acrobat®are trademarks of Adobe Systems Incorporated.
Java™ is a U.S. trademark of Sun Microsystems, Inc.
© Keysight Technologies, Inc. 2010-2014 Version 2.00
Keysight 53220A/53230A Programmer's Reference 11
Welcome