Keysight 53230A - Input{1|2}:Level:ptpeak

INPut{1|2}:LEVel:PTPeak?
Syntax
INPut[{1|2}]:LEVel:PTPeak?
Description
This query measures and returns the peak-to-peak voltage of the input signal.
Remarks
l SYSTem:ALEVel:FREQuency selects the minimum input signal frequency for voltage measurements.
DC signals will also measure correctly.
l INPut or INPut1 refers to channel 1; INPut2 to channel 2.
l If this command is sent while measurements are ongoing, the value returned will be the last measured
value, not the current value.
Return Format
The query returns the peak-to-peak voltage in the form +1.25000000E+000.
Examples
The following example makes a peak-to-peak voltage measurement on channel 1.
INP:LEV:PTP?
Typical Response: +2.43000000E+000
See Also
INPut{1|2}:PROBe
SYSTem:ALEVel:FREQuency
INPut{1|2}:LEVel:PTPeak?
212 Keysight 53220A/53230A Programmer's Reference