EasyManua.ls Logo

Keysight 53230A - Mmemory:rdirectory

Keysight 53230A
518 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MMEMory:RDIRectory
Syntax
MMEMory:RDIRectory <folder>
Description
This command removes the specified folder.
Remarks
l The format for <folder> is "[[<drive>:]<path>]", where <drive> can be INTernal or USB, and <path> is a
folder path.
o
INTernal specifies the internal flash file system. USB specifies a front panel USB storage device.
o
If <drive> is specified, <path> is interpreted as an absolute folder path. Absolute paths begin with a "\"
or "/" and start at the root folder of <drive>.
o
If <drive> is omitted, <path> is relative to the folder specified by the MMEMory:CDIRectory command.
Relative paths must not begin with "\" or "/".
o
Folder and file names cannot contain the following characters: \ / : * ? " < > |
o
<folder> cannot exceed 240 characters.
o
The specified folder must exist and cannot be marked as hidden or system.
o
The folder must be empty (no files stored in the folder).
l You cannot delete the folder selected by MMEMory:CDIRectory.
Examples
The following example removes the folder "\Backup" on the internal flash file system.
MMEM:RDIR "INT:\Backup"
See Also
MMEMory:CDIRectory
MMEMory:RDIRectory
306 Keysight 53220A/53230A Programmer's Reference

Table of Contents

Other manuals for Keysight 53230A

Related product manuals