Keysight 53230A - Mmemory:store:preferences

MMEMory:STORe:PREFerences
Syntax
MMEMory:STORe:PREFerences <file>
Description
This command stores non-volatile I/O settings and user preferences to a file. The file name optionally
includes the folder name and the .prf file extension.
Remarks
l The format for <file> is "[[<drive>:]<path>]<file_name>", where <drive> can be INTernal or USB, and
<path> is a folder path.
o
INTernal specifies the internal flash file system. USB specifies a front panel USB storage device.
o
If <drive> is specified, <path> is interpreted as an absolute folder path. Absolute paths begin with a "\"
or "/" and start at the root folder of <drive>.
o
If <drive> is omitted, <path> is relative to the folder specified by the MMEMory:CDIRectory command.
Relative paths must not begin with "\" or "/".
o
Folder and file names cannot contain the following characters: \ / : * ? " < > |
o
The combination of folder and file name cannot exceed 240 characters.
o
The destination folder must exist and cannot be marked as hidden or system.
o
If the destination file exists, it will be overwritten, unless marked as a hidden or system file.
l User preferences include the values for:
o
Display brightness, radix, separator, and screen saver state
o
Help system language
o
MEMory:STATe:RECall:AUTO
o
MEMory:STATe:RECall:SELect
o
SENSe:ROSCillator:EXTernal:FREQuency
o
SENSe:ROSCillator:INTernal:POWer:STANdby
o
SENSe:ROSCillator:SOURce
o
SENSe:ROSCillator:SOURce:AUTO
o
SYSTem:ALEVel:FREQuency
o
SYSTem:BATTery:ENABle
o
SYSTem:BEEPer:STATe
o
SYSTem:LANGuage
o
SYSTem:TIMeout
Examples
The following example stores the current instrument state to the state file MyPreferences.prf in the root
directory of the internal flash file system.
MMEM:STOR:PREF "INT:\MyFreqMeas"
MMEMory:STORe:PREFerences
308 Keysight 53220A/53230A Programmer's Reference