DISPlay:MODE
Syntax
DISPlay[:WINDow]:MODE {NUMeric | HISTogram | TCHart}
DISPlay[:WINDow]:MODE?
Description
This command selects whether the front panel display shows numeric information, histogram data or the
trend chart.
Remarks
l Histogram computation must be enabled (CALCulate2:TRANsform:HISTogram:STATe ON set)
to display histogram data.
l The display mode is unaffected by a Factory Reset (*RST command), or an Instrument Pre-
set (SYSTem:PRESet command). It is set to NUMeric at power-on.
Return Format
The query returns the current display mode: NUM, HIST, or TCH.
Examples
The following example selects displaying histogram data on the front panel.
DISP:MODE HIST
See Also
CALCulate:TRANsform:HISTogram:STATe
CALCulate:STATe
Keysight 53220A/53230A Programmer's Reference 167
DISPlay:MODE
To Next Page
Loading...
