SYSTem:LOCK:OWNer?
Syntax
SYSTem:LOCK:OWNer?
Description
This command returns the I/O interface that currently has a lock.
Remarks
l When a lock is active, Bit 10 in the Standard Operation Register will be set (see STATus:OPERa-
tion:CONDition? command). When the lock is released on all I/O interfaces, this bit will be cleared.
Return Format
The query returns GPIB, USB, VXI11, LAN<IP Address>, or WEB<IP Address> indicating the I/O interface
which currently has a lock. If no interfaces have a lock, "NONE" is returned.
Example
The following example returns which I/O interface currently has a lock.
SYST:LOCK:OWN?
Typical Response: LAN169.254.149.35
See Also
SYSTem:LOCK:NAME?
SYSTem:LOCK:RELease
SYSTem:LOCK:REQuest?
SYSTem:LOCK:OWNer?
450 Keysight 53220A/53230A Programmer's Reference
To Next Page
Loading...
