MMEMory:MDIRectory
Syntax
MMEMory:MDIRectory <folder>
Description
This command creates a new folder.
Remarks
l The format for <folder> is "[[<drive>:]<path>]", where <drive> can be INTernal or USB, and <path> is a
folder path.
o
INTernal specifies the internal flash file system. USB specifies a front panel USB storage device.
o
If <drive> is specified, <path> is interpreted as an absolute folder path. Absolute paths begin with a "\"
or "/" and start at the root folder of <drive>.
o
If <drive> is omitted, <path> is relative to the folder specified by the MMEMory:CDIRectory command.
Relative paths must not begin with "\" or "/".
o
Folder and file names cannot contain the following characters: \ / : * ? " < > |
o
<folder> cannot exceed 240 characters.
o
Any intermediate folders must exist and cannot be marked as hidden or system.
o
This command will only create the last folder in <folder>.
Examples
The following example creates the folder "\Backup" on the internal flash file system.
MMEM:MDIR "INT:\Backup"
See Also
MMEMory:CDIRectory
MMEMory:RDIRectory
MMEMory:MDIRectory
304 Keysight 53220A/53230A Programmer's Reference
To Next Page
Loading...
