INPut{1|2}:LEVel:MINimum?
Syntax
INPut[{1|2}]:LEVel:MINimum?
Description
This query measures and returns the minimum voltage of the input signal.
Remarks
l SYSTem:ALEVel:FREQuency selects the minimum input signal frequency for voltage measurements.
DC signals will also measure correctly.
l INPut or INPut1 refers to channel 1; INPut2 to channel 2.
l If this command is sent while measurements are ongoing, the value returned will be the last measured
value, not the current value.
Return Format
The query returns the minimum input voltage in the form +1.25000000E+000.
Examples
The following example makes a minimum voltage measurement on channel 1.
INP:LEV:MIN?
Typical Response: -1.21500000E+000
See Also
INPut{1|2}:PROBe
SYSTem:ALEVel:FREQuency
Keysight 53220A/53230A Programmer's Reference 211
INPut{1|2}:LEVel:MINimum?
To Next Page
Loading...
