CALCulate1:SCALe:STATe
Syntax
CALCulate[1]:SCALe[:STATe] {OFF | ON}
CALCulate[1]:SCALe[:STATe]?
Description
This command enables or disables the scaling function.
Remarks
l The CALCulate1 subsystem must also be enabled by CALCulate1:STATe for scaling to be performed.
l The CALCulate subystem and the individual calculate functions are disabled for timestamp meas-
urements.
l The instrument disables the scaling function state after a Factory Reset (*RST command) or an Instru-
ment Preset (SYSTem:PRESet command).
Return Format
The query returns the current scaling state: 0 (OFF) or 1 (ON).
Examples
The following example enables scaling using the equation 100x-5.
CALC:FUNC SCAL
CALC:SCAL:GAIN 100.0
CALC:SCAL:OFFS 5.0
CALC:SCAL:INV OFF
CALC:SCAL:STAT ON
CALC:STAT ON
See Also
CALCulate1:SCALe:FUNCtion
CALCulate1:SCALe:GAIN
CALCulate1:SCALe:OFFset
CALCulate1:STATe
Keysight 53220A/53230A Programmer's Reference 51
CALCulate1:SCALe:STATe
To Next Page
Loading...
