Keysight 53230A - Welcome

Welcome
This Help file contains reference information to help you program the Keysight53220A/230A Universal
Frequency Counter/Timer over a remote interface using the SCPI programming language.
Introduction to the SCPI Language
Commands by Subsystem
Command Quick Reference
SCPI Error Messages
Power-On and Reset State
Related Information
IO Libraries and Instrument Drivers
The Keysight IO Libraries Suite software is provided on the Keysight Automation Ready CD-ROM provided
with your instrument. Installation instructions are provided on the CD-ROM.
You can also download the Keysight IO Libraries Suite software, along with IVI-COM and LABview drivers
from the Keysight Developer Network at adn.tm.agilent.com.
Keysight53220A/230A Documentation
The Keysight 53220A/230A Programmer's Reference is provided as a Windows® Compiled Help (.chm)
file on the Keysight 53220A/230A Product Reference CD-ROM shipped with your instrument.
In addition, the following documents are available in Adobe® PDF format on this CD-ROM. (Requires
Adobe Reader.)
l Keysight 53220A/230A 350MHz Universal Counter/Timer Quick Start Tutorial
l Keysight 53220A/230A 350MHz Universal Counter/Timer User’s Guide
l Keysight 53210A/53220A/53230A 350 MHz Counter Service Guide
You can also download these documents from the Web at www.keysight.com.
For information about connecting instruments to USB, LAN, and GPIB interfaces and how to configure
and troubleshoot these interfaces, refer to the Keysight USB/LAN/GPIB Interfaces Connectivity Guide.
This guide is provided on the Keysight Automation Ready CD-ROM. Or you can download the guide from
the Web at www.keysight.com/find/connectivity.
Keysight 53220A/230A Web Interface
Welcome
10 Keysight 53220A/53230A Programmer's Reference