LXI:MDNS:ENABle
Syntax
LXI:MDNS:ENABle {OFF | ON}
LXI:MDNS:ENABle?
Description
This command enables or disables multicast DNS (mDNS). mDNS provides the capabilities of a DNS server
for service discovery in a small network that does not have a DNS server.
Remarks
l The mDNS enable setting is stored in non-volatile memory, and does not change when power has been
off, after a Factory Reset (*RST command), or after an Instrument Preset (SYSTem:PRESet command).
l mDNS is enabled when the instrument is shipped from the factory or after a SYSTem:SECur-
ity:IMMediate command.
Return Format
The query returns the current mDNS enable state: 0 (OFF) or 1 (ON).
Examples
The following example turns on mDNS.
LXI:MDNS:ENAB ON
See Also
Keysight 53220A/53230A Programmer's Reference 231
LXI:MDNS:ENABle
To Next Page
Loading...
