CALCulate1:AVERage:CLEar
Syntax
CALCulate[1]:AVERage:CLEar[:IMMediate]
Description
This command clears all computed statistics values.
Remarks
l This command clears the minimum, maximum, average, count, and deviation values (but no meas-
urements are cleared from memory).
l The instrument clears the statistical values when CALCulate1:AVERage:STATe ON is sent, when the
measurement function is changed, when the INITiate:IMMediate, MEASure? or READ? commands are
executed, when the CALCulate1:AVERage:CLEar command is executed, after a Factory Reset (*RST
command) or after an Instrument Preset (SYSTem:PRESet command).
Return Format
This command has no query form.
Examples
The following command clears the stored statistical data.
CALC:AVER:CLE
See Also
CALCulate1:AVERage:COUNt?
CALCulate1:AVERage:STATe
CALCulate1:STATe
CALCulate1:AVERage:CLEar
70 Keysight 53220A/53230A Programmer's Reference
To Next Page
Loading...
