CALibration Subsystem Introduction
The CALibration commands are used to calibrate the Keysight 53220A/230A.
For a more detailed discussion of the calibration procedures, see the Keysight
53210A/53220A/53230A 350 MHz Counter Service Guide. Please refer to the Ser-
vice Guide before attempting to calibrate the instrument. Improper use of the
CALibration commands can adversely affect the accuracy and reliability of the instru-
ment.
Command Summary
CALibration:ALL?
CALibration:COUNt?
CALibration:LEVel?
CALibration:SECurity:CODE
CALibration:SECurity:STATe
CALibration:SECurity:STATe?
CALibration:STRing
CALibration:STRing?
CALibration:VALue
CALibration:VALue?
Related Commands
*CAL?
Keysight 53220A/53230A Programmer's Reference 99
CALibration Subsystem Introduction
To Next Page
Loading...
