Keysight 53230A - System:communicate:lan:update

To Next Page

To Previous Page

SYSTem:COMMunicate:LAN:UPDate

Syntax

SYSTem:COMMunicate:LAN:UPDate

Description

This command stores any changes made to the LAN settings into non-volatile memory and restarts the

LAN driver with the updated settings.

Remarks

l This command must be sent after changing the settings for DHCP, DNS, gateway, hostname, IP address,

subnet mask, WINS.

l You should make all desired changes to the LAN settings before sending this command.

Example

The following example configures the instrument to use statically assigned LAN settings.

SYST:COMM:LAN:DHCP OFF

SYST:COMM:LAN:DNS "198.105.232.4"

SYST:COMM:LAN:DNS2 "198.105.232.5"

SYST:COMM:LAN:GAT "198.105.232.1"

SYST:COMM:LAN:HOST "LAB1-CNTR"

SYST:COMM:LAN:IPAD "198.105.232.101"

SYST:COMM:LAN:SMAS "255.255.255.0"

SYST:COMM:LAN:WINS "198.105.232.4"

SYST:COMM:LAN:WINS "198.105.232.5"

SYST:COMM:LAN:UPD

The following example configures the instrument back to use DHCP.

SYST:COMM:LAN:DHCP ON

SYST:COMM:LAN:UPD

Other manuals for Keysight 53230A