CALCulate1:AVERage:MAXimum?
Syntax
CALCulate[1]:AVERage:MAXimum?
Description
This query returns the maximum value of all measurements taken since the last time statistics were
cleared.
Remarks
l You can read the statistical values at any time.
l The instrument clears the statistical values when CALCulate1:AVERage:STATe ON is sent, when the
measurement function is changed, when the INITiate:IMMediate, MEASure? or READ? commands are
executed, when the CALCulate1:AVERage:CLEar command is executed, after a Factory Reset (*RST
command) or after an Instrument Preset (SYSTem:PRESet command).
Return Format
The query returns the maximum value found in the form +1.34892723498343E+007.
Examples
The following example returns the maximum value of 100 frequency measurements.
CONF:FREQ 1.0E6,.001
SAMP:COUN 100
CALC:AVER:STAT ON
CALC:STAT ON
INIT
*WAI wait for all reading to complete
CALC:AVER:MAX?
Typical Response: +1.005270000E+006
See Also
CALCulate1:AVERage:ALL?
CALCulate1:AVERage:CLEar
CALCulate1:AVERage:COUNt?
CALCulate1:AVERage:STATe
CALCulate1:STATe
CALCulate1:AVERage:MAXimum?
72 Keysight 53220A/53230A Programmer's Reference
To Next Page
Loading...
