Keysight 53230A - Lxi:identify:state

LXI:IDENtify:STATe
Syntax
LXI:IDENtify[:STATe] {OFF | ON}
LXI:IDENtify[:STATe]?
Description
This command turns the LXI LAN Status Indicator on the front panel display on or off.
Remarks
l The LAN Status Indicator helps you identify which LXI instrument is associated with the LAN address
you are using.
l The instrument turns off the LAN Status Indicator after a Factory Reset (*RST command) or an Instru-
ment Preset (SYSTem:PRESet command).
Return Format
The query returns the current LAN Status Indicator state: 0 (OFF) or 1 (ON).
Examples
The following example turns on the LAN Status Indicator.
LXI:IDEN ON
See Also
LXI:IDENtify:STATe
230 Keysight 53220A/53230A Programmer's Reference