Keysight 53230A - System:lock:name

SYSTem:LOCK:NAME?
Syntax
SYSTem:LOCK:NAME?
Description
This command returns the current I/O interface (the I/O interface in use by the querying computer).
Remarks
l Use this command to determine the interface that you are using. Then use the SYSTem:LOCK:OWNer?
command to determine which interface, if any, has the lock.
Return Format
The query returns GPIB, USB, VXI11, or LAN<IP Address> indicating the I/O interface being used by the
querying computer.
Example
The following example returns which I/O interface is in use.
SYST:LOCK:NAME?
Typical Response: LAN169.254.149.35
See Also
SYSTem:LOCK:OWNer?
SYSTem:LOCK:RELease
SYSTem:LOCK:REQuest?
Keysight 53220A/53230A Programmer's Reference 449
SYSTem:LOCK:NAME?