DATA:POINts?
Syntax
DATA:POINts?
Description
This query returns the total number of measurements currently stored in the reading memory.
Remarks
l You can read the count at any time, even during a series of measurements.
l You can store up to 1,000,000 measurements in the reading memory.
l The instrument clears all measurements from memory when the measurement function is changed,
when the INITiate:IMMediate, MEASure:<function>? or READ? commands are executed, after a Factory
Reset (*RST command) or after an Instrument Preset (SYSTem:PRESet command).
Return Format
The query returns the number of measurements in the reading memory in the form +1024.
Examples
The following example returns the number of measurements in the reading memory.
DATA:POIN?
Typical Response: +215
See Also
DATA:POINts:EVENt:THReshold
Keysight 53220A/53230A Programmer's Reference 161
DATA:POINts?
To Next Page
Loading...
