MMEMory:DELete
Syntax
MMEMory:DELete <file>
Description
This command deletes the specified file. The file name must include any file extension.
Remarks
l The format for <file> is "[[<drive>:]<path>]<file_name>", where <drive> can be INTernal or USB, and
<path> is a folder path.
o
INTernal specifies the internal flash file system. USB specifies a front panel USB storage device.
o
If <drive> is specified, <path> is interpreted as an absolute folder path. Absolute paths begin with a "\"
or "/" and start at the root folder of <drive>.
o
If <drive> is omitted, <path> is relative to the folder specified by the MMEMory:CDIRectory command.
Relative paths must not begin with "\" or "/".
o
Folder and file names cannot contain the following characters: \ / : * ? " < > |
o
The combination of folder and file name cannot exceed 240 characters.
o
The specified file cannot be marked as hidden or system.
l This command deletes files. To delete a folder, use the MMEMory:RDIRectory command.
Examples
The following example deletes the state file MyFreqMeas.sta from the root directory of the internal flash
file system.
MMEM:DEL "INT:\MyFreqMeas.sta"
See Also
MMEMory:CDIRectory
MMEMory:DELete
298 Keysight 53220A/53230A Programmer's Reference
To Next Page
Loading...
