CALibration:VALue
Syntax
CALibration:VALue <value>
CALibration:VALue?
Description
This command specifies the value of the known calibration signal.
For a more detailed discussion of the calibration procedures, see the Keysight
53210A/53220A/53230A 350 MHz Counter Service Guide. Please refer to the Ser-
vice Guide before attempting to calibrate the instrument. Improper use of the
CALibration commands can adversely affect the accuracy and reliability of the instru-
ment.
Parameters
Name Type Range of Values Default Value
<value> Numeric See the Keysight 53220A/230A 350MHz Universal Counter/Timer Service Guide This is a required parameter
Remarks
l
Refer to the Keysight 53210A/53220A/53230A 350 MHz Counter Service Guide for detailed pro-
cedures, including how to connect a calibration source, recommended equipment, the specified cal-
ibration points, and so forth.
Return Format
The query returns the calibration value in the form +1.00000000000000E+007.
Examples
The following example sets calibration value to +10.000010E6.
CAL:VAL 10.000010E6
The following example returns the present calibration value.
CAL:VAL?
Typical Response: +1.00010100000000E+007
CALibration:VALue
110 Keysight 53220A/53230A Programmer's Reference
To Next Page
Loading...
