SENSe:FUNCtion
Syntax
[SENSe:]FUNCtion[:ON] "<function>"
[SENSe:]FUNCtion[:ON]?
Description
This command selects the measurement function (all function-related measurement attributes are
retained).
Parameters
Name Type Range of Values Default Value
<function> Discrete Desired function enclosed in quotes:
FREQuency [{1 | 2 | 3}]
FREQuency:RATio [{1,2 | 1,3 | 2,1 | 2,3 | 3,1 | 3,2}]
PERiod [{1 | 2 | 3}]
FTIMe [{1 | 2}]
NDUTycycle [{1 | 2}]
PDUTycycle [{1 | 2}]
NWIDth [{1 | 2}]
PWIDth [{1 | 2}]
PHASe [{1,2 | 2,1}]
RTIMe [{1 | 2}]
SPERiod [{1 | 2}]
TINTerval [{1,2 | 2,1 | 1 | 2}]
TOTalize [{1 | 2}]
On the Keysight 53230A, the following additional
measurement functions are available:
TSTamp [{1 | 2 | 3}]
On the Keysight 53230A with option 150, the following
additional measurement functions are available:
FREQuency:BURSt [3]
FREQuency:PRF [3]
FREQuency:PRI [3]
NWIDth:BURSt [3]
PWIDth:BURSt [3]
This is a required parameter
Remarks
l If you change the measurement function, all measurements in the reading memory, the limit test pass/-
fail counts, and statistics are cleared, and the CALCulate subystem and the individual calculate func-
tions are disabled.
SENSe:FUNCtion
322 Keysight 53220A/53230A Programmer's Reference
To Next Page
Loading...
