LXI:RESet
Syntax
LXI:RESet
Description
This command sets all LAN configuration settings to factory settings and restarts the LAN interface of the
instrument.
Remarks
l Depending on your local network, the LAN interface may take several seconds to restart after this com-
mand is sent.
l If the LAN interface or specific LAN services (VXI-11, sockets, ...) have been disabled by
SYSTem:COMMunicate:ENABle, you must separately reenable the interface or services and power
cycle the instrument for LAN to be operational.
Examples
The following example reset the LAN interface.
LXI:RES
See Also
SYSTem:COMMunicate:ENABle
Keysight 53220A/53230A Programmer's Reference 235
LXI:RESet
To Next Page
Loading...
