Keysight 53230A - Memory:state:valid

MEMory:STATe:VALid?
Syntax
MEMory:STATe:VALid? {0 | 1 | 2 | 3 | 4}
Description
This command queries the specified storage location to determine if a valid state is currently stored in this
location.
Remarks
l You can use this command before sending the *RCL command to determine if a state has been pre-
viously stored in this location.
Return Format
The query returns 0 if no state has been stored or if it has been deleted. It returns 1 if a valid state is stored
in this location.
Example
The following example returns the state of storage location 3.
MEM:STAT:VAL? 3
Typical Response: 0
See Also
*RCL
*SAV
Keysight 53220A/53230A Programmer's Reference 287
MEMory:STATe:VALid?