Keysight 53230A - System:license:install

SYSTem:LICense:INSTall
Syntax
SYSTem:LICense:INSTall [{<folder> | <file>}]
Description
This command installs all licenses from a specified file or from all license files in the specified folder.
Parameters
Name Type Range of Values Default Value
<folder> String Any valid folder name Root directory of a front panel USB storage device
<file> String A valid license file name Required if desired
Remarks
l Available only on the Keysight 53230A.
l License files must have a ".lic" file extension.
l The format for <folder> is "[[<drive>:]<path>]", where <drive> can be INTernal or USB, and <path> is a
folder path.
o
INTernal specifies the internal flash file system. USB specifies a front panel USB storage device.
o
If <drive> is specified, <path> is interpreted as an absolute folder path. Absolute paths begin with a "\"
or "/" and start at the root folder of <drive>.
o
If <drive> is omitted, <path> is relative to the folder specified by the MMEMory:CDIRectory command.
Relative paths must not begin with "\" or "/".
o
<folder> cannot exceed 240 characters.
o
The specified folder must exist and cannot be marked as hidden or system.
l The format for <file> is "[<drive>:<path>]<file_name>", where <drive> can be INTernal or USB, and
<path> must be an absolute folder path.
o
INTernal specifies the internal flash file system. USB specifies a front panel USB storage device.
o
If <drive>:<path> is omitted, the folder specified by the MMEMory:CDIRectory command is used.
o
Absolute paths begin with a "\" or "/" and start at the root folder of <drive>.
o
Folder and file names cannot contain the following characters: \ / : * ? " < > |
o
The combination of folder and file name cannot exceed 240 characters.
o
The specified file cannot be marked as hidden or system.
Keysight 53220A/53230A Programmer's Reference 433
SYSTem:LICense:INSTall