MMEMory:LOAD:STATe
Syntax
MMEMory:LOAD:STATe <file>
Description
This command loads the instrument state from a state file. The file name optionally includes the .sta file
extension.
Remarks
l The storage locations are the same as the ones used by *SAV and *RCL.
l The format for <file> is "[<drive>:<path>]<file_name>", where <drive> can be INTernal or USB, and
<path> must be an absolute folder path.
o
INTernal specifies the internal flash file system. USB specifies a front panel USB storage device.
o
I
f
<
drive>:
<p
a
th
>
is
o
m
i
tt
e
d,
the
fo
ld
er
spe
cifi
ed
by
th
e
MMEMory:CDIRectory command is used.o
Absolute paths begin with a "\" or "/" and start at the root folder of <drive>.
o
Folder and file names cannot contain the following characters: \ / : * ? " < > |
o
The combination of folder and file name cannot exceed 240 characters.
o
The specified file cannot be marked as hidden or system.
Examples
The following example loads the instrument state from the state file MyFreqMeas.sta in the root directory
of the internal flash file system.
MMEM:LOAD:STAT "INT:\MyFreqMeas"
See Also
MMEMory:CDIRectory
MMEMory:STORe:STATe
Keysight 53220A/53230A Programmer's Reference 303
MMEMory:LOAD:STATe
To Next Page
Loading...
