SYSTem:BEEPer:IMMediate
Syntax
SYSTem:BEEPer[:IMMediate]
Description
This command issues a single beep immediately from the instrument. This may be useful for program
development and troubleshooting.
Remarks
l This command overrides the current beeper state (see the SYSTem:BEEPer:STATe command). This
means that you can issue a single beep even if the beeper is turned off.
Example
The following example issues a single beep from the instrument.
SYST:BEEP
See Also
SYSTem:BEEPer:STATe
Keysight 53220A/53230A Programmer's Reference 441
SYSTem:BEEPer:IMMediate
To Next Page
Loading...
