Keysight 53230A - Display:digit:mask:auto

DISPlay:DIGit:MASK:AUTO
Syntax
DISPlay[:WINDow]:DIGit:MASK:AUTO {OFF | ON}
DISPlay[:WINDow]:DIGit:MASK:AUTO?
Description
This command disables or enables automatic selection of the number of significant digits displayed for
measurements on the front panel.
Remarks
l The number of digits display will vary based on measurement function, gate time, and gate source.
l The automatic selection is unaffected by a Factory Reset (*RST command), or an Instru-
ment Preset (SYSTem:PRESet command). It is enabled at power-on.
Return Format
The query returns the automatic selection state: 0 (OFF) or 1 (ON).
Examples
The following example enables automatic selection of the number of significant digits displayed for meas-
urements.
DISP:DIG:MASK:AUTO ON
See Also
DISPlay:DIGit:MASK
DISPlay:DIGit:MASK:AUTO
166 Keysight 53220A/53230A Programmer's Reference