CONF:FTIM
SAMP:COUN 2
READ?
Typical Response: +5.10520000000000E-006,+5.10360000000000E-006
The following example configures the instrument for fall time measurements on channel 2 with 20% and
80% reference levels, makes one measurement, and then transfers the measurement to the instrument
output buffer.
CONF:FTIM 20,80,(@2)
READ?
Typical Response: +5.02573000000000E-006
See Also
CONFigure?
INITiate[:IMMediate]
MEASure?
READ?
CONFigure:FTIMe
130 Keysight 53220A/53230A Programmer's Reference
To Next Page
Loading...
