The following example configures the instrument for pulsed duty cycle measurements on channel 2 with
a 1.2V reference level, makes one measurement using an external trigger, and then transfers the meas-
urement to the instrument output buffer.
CONF:PDUT 1.2V,(@2)
TRIG:SOUR EXT;SLOP POS
INIT
FETC?
Typical Response: +4.82342300000000E-001
See Also
CONFigure?
INITiate[:IMMediate]
MEASure?
READ?
Keysight 53220A/53230A Programmer's Reference 137
CONFigure:PDUTycycle
To Next Page
Loading...
